This line is apply for various kinds of steel plates slitting, recoiling. It used to uncoiling large coil drum plate, and slitting into empty strips as required width, then to recoiling and packing into whole bale of plane plate for next procedure of cold-bending, punching, pipe welder, etc.
Charging—uncoiling—pressing and guiding—pinch preleveler—scrap shear—transitional worktable —guiding—slitting—scrap winding—hydraulic loop bridge —pre-separating—damping pressing—dividing—recoiling—manual baling—discharging.
| Item | Parameter | |
| Coil specification | Material | Hot Rolled Steel Coil |
| Grade | API Grade B, Q235, ASTM
UTS(Min): 520 Mpa, YTS(Min): 425 Mpa |
|
| Thickness | 2.0mm-10.0mm | |
| Width | 600mm-1600mm | |
| Coil plate OD. | Φ1000mm-2000mm | |
| Coil plate ID. | Φ600mm-Φ800mm | |
| Max.Coil weight | 25tons | |
| Slitting precision | Width tolerance
Vertical tolerance(side bending): Burr |
0.10mm
≤0.8mm/m ≤0.1mm |
| Shearing type | Tensile shear, synchronous shear, | |
| Slitting strip | thickness 2-4mm, 12 strips; over 4mm, according to thickness | |
| Recoiling diameter | Φ600mm | |
| Slitting speed | 0-40m/min | |
| Standard height of equipment working surface | +800mm | |
