This line is apply for various kinds of steel plates slitting, recoiling. It used to uncoiling large coil drum plate, and slitting into umpty strips as required width, then to recoiling and packing into whole bale of plane plate for next procedure of cold-bending, punching, pipe welder, etc.
Charging—uncoiling—pressing and guiding—pinch preleveler—scrap shear—transitional worktable —guiding—slitting(double slitter switchover)—scrap winding—hydraulic loop bridge —pre-separating—damping pressing—separating—recoiling—manual baling—discharging.
| Item | Parameter | |
|
Coil specification
|
Material | Apply to σb≤460MPa, σs≤235MPa steel plate |
| Thickness | 0.9mm-5mm | |
| Width | 800mm-1300mm | |
| Coil plate OD. | φ800mm-φ2000mm | |
| Coil plate ID. | Φ508m-Φ610mm (add pad) | |
| Max. Coil weight | 15ton | |
| Slitting precision | Width tolerance:
Vertical tolerance(side bending): Burr |
±0.10mm
≤0.8mm/m ≤0.1mm |
| Shearing type | Tensile shear, synchronous shear, | |
| Slitting strip | thickness 0.9-3mm;13 strips;
＞3mm according to the thickness |
|
| Recoiling diameter | Φ610mm | |
| Slitting speed | 0-80m/min(tensile shear),
0-53m/min(synchronous shear) |
|
| Standard height of equipment working surface | 800mm | |
| Production capacity: Available working time: 24h/dayx340day/y=8160h/y Minus maintenance-192h/y=7968h/y Efficiency/operator etc…7968×0.85=6772h/y (net working time) 6772×60/45=9000coil processed/yx15tons=135,000ton/y |
||
